Support contents
Download
Technical Data
Manual / Instructions
Reticle
Line Thickness |
MTR-RTM Reticle – Target size according to the magnification |
MTR-RTM Reticle – 日本語チラシ |
FML-MB reticle |
Leaflets for the newest Products
1-10x24FFP Dual Reticle(2021) |
1.5-15×42 SFP (2021) |
4.5-28×52 FFP(2021) |
5x-42×56 FFP in MOA (2021) |
1.5x-15×42 SFP in MIL with tactical turrets (2021) |
1x-10×24 Shorty Dual(FFP+SFP)(2021) |
Catalog / Warranty
Product catalog 2019 (E-book) |
March Scopes Catalog 2020 |
March Scopes Warranty |
FAQ
Where do I buy March Scope ?
Please refer to the dealer lists in the “Where to Buy” for your nearest dealer. If there is not a dealer in your country, please contact your nearest regional distributor of March Scopes.
What is the New March Scopes Unswerving Warranty 2020 ?
March Scopes are 100% Hand Built in Japan by Craftsmen with over 40 years of experience. Each Scope contains more than 150 parts which are all made in Japan with absolute precision and quality. The Scope you purchase will have been inspected twenty times by our expert craftsmen, including recoil test up to one thousand times the force of gravity before it leaves our factory. We are proud of our quality; March Scopes are virtually repair-free. Nevertheless, should you require any maintenance or servicing, March Service Center with highly skilled engineers will be happy to assist you. As of Jan 2020, scopes purchased previous to this will also enjoy the new warranty term.
* Please see the above “March Scopes Warranty 2020” in Catalog/ Warranty section to see the details.
March Scopes Unswerving Warranty
(A) Warranty Terms – No warranty card needed – No receipt required – No need for registration – Warranty is automatically and fully transferable to future owners of the Scope – If a manufacturing problem caused the defect, DEON will repair the scope for no additional cost to the owner even after the Warranty has expired. (all cases determined by the Manufacturer) Warranty is 10 years beginning on the date the Scope is manufactured, managed by the serial number on the Scope. Electronic components are covered by a 2-year warranty from the date of manufacturing. Upon presentation of a receipt the warranty period may be extended to cover the full warranty period, beginning on the original purchase date of the Scope.
(B) Warranty Content 1) If the repair is a Warranty case (all cases determined by the Manufacturer) : If the Scope has a manufacturing defect or has been damaged through appropriate use as per manufacturer’s instructions, March Service Center will carry out a warranty repair at no charge. In the event that the range of products is changed, we reserve the right to repair defective instruments or to replace them with those of equal value. 2) If the repair is not subject to the Warranty (all cases determined by the Manufacturer) : You will receive a cost estimate for the service/repair by e-mail from March Service Center. No repairs will be performed until we have authorization.
What should I do when I want you to repair my rifle scope ?
Please refer to the dealer lists in the “Where to Buy” for your nearest dealer. If there is not a dealer in your country, please contact your nearest regional distributor of March Scopes or to DEON in Japan (manufacturer of March Scopes).
How much time do you need to repair my rifle scope ?
Although dependent on the condition of your scope, we ship repaired scope to you about 2 weeks later after we received it.
What is the contact information ?
Address : 9700-3 Miyagawa, Chino-shi, Nagano-ken, 391-0013 Japan
Tel : +81-266-75-5658
Email : info@deon.co.jp
You can also send us a message through “Contact us” under the “About us” page.
What is the value of MOA and MIL used in March Scopes?
1 MOA is 1.047inch @100yard (True MOA). 1 MIL is 1/6283. We adopt this value for all our March Scopes.
Can I just have the scope inspected?
We offer a maintenance and inspection service for a fee. Please contact info@deon.co.jp for further information.
What is the recommended torque value and mounting position?
Please click HERE to see the detailed specification.
What is the brightness difference of illumination modules (6level, standard 4level, low illumination 4level)?
Can March Scope handle the impact of 50cal recoil?
We conduct an impact test up to 1000G (1000times of gravity). All our scopes can stand the impact of a 50cal recoil (including the 50 BMG) on usual shooting conditions.
How do I free the 0-set?
In case the 0-set is stuck, please try the following instructions. Please click HERE.
What is the diopter adjustment range of March Scopes?
The diopter adjustment range is from -2 to +2 for all March Scopes. Please wear your glasses when adjusting. Also please check the following for detailed instruction. “How to adjust the Eyepiece”
Is March Scopes compatible to Night Visions?
March Scopes are compatible to night visions. If you attach the night vision on the objective bell, you will be seeing the image of the night vision through the scope. Our illumination modules will be adequate. We have 3 kinds of illumination modules, but we recommend the 6 level illumination module. Please see the following for further details on the brightness difference of illumination modules. PDF “Illumination brightness”
How do I ship back the scope to Japan for service?
First please contact our repair center at info@deon.co.jp. Please tell us the model number, serial number and the symptoms. Our repair center will instruct you how to fill in the invoices when shipping back to Japan. Please do not ship by UPS, Fedex or DHL. We recommend that you ship back to us by EMS(International Postal service) as it is faster for us to receive your scope. Please click HERE to see your country’s postal service. Please contact us if you have any questions. Thank you!